Hyperion Tiles Ascot BerkshireBEAUTY IN EVERY DETAIL

Product details

Product story

Half The Width, Twice The Options

Take the field tile, halve it, and you have a 152 x 76mm glazed ceramic wall tile that lets a run be set out in courses of almost any width: the Artworks Windsor Blue Half Tile, from Hyperion Tiles, your official Original Style stockist.

The half tile is the field tile's working companion — the same 7mm ceramic body, the same full-gloss glaze, the same rich mid-blue, on a footprint exactly half as wide. That proportion is what makes it useful. It closes out a course without a cut, it lets you run a narrow band beneath a moulding, and used across a whole wall it produces a fine, closely spaced rhythm of its own. A 152 x 76mm tile covers 0.011552m², so a square metre of wall takes about 87 of them. Box quantities stand apart from that: 44 tiles per box, 0.511m² covered as supplied — a little under two boxes for each square metre.

Half tiles earn their place in tight spaces: the return wall of a shower, the panel behind a basin, a chimney breast too narrow to take full squares without awkward cutting. Laid in a running bond the smaller module makes the gloss break more often, and the blue arrives as a surface of many small reflections rather than one broad plane. Against white or a soft off-white above, it holds the blue-and-white line that English tiling has kept for three hundred years. Turn a corner with the External Corner Trim and the glazed edge continues around the angle.

Product specification

Product Name: Artworks Windsor Blue Half Tile

Brand: Original Style

Collection: Artworks

Material: Glazed Ceramic

Finish: Gloss

Colour: Windsor Blue

Tile Size: 152 x 76 x 7mm (15.2 x 7.6 x 0.7cm)

Edge Finish: Straight — flat glazed face with a plain square edge

Suitability: Internal Walls — wet and dry areas

Frostproof: No — internal use only

Sealing: Not required

Sold By: The Box — 44 tiles per box, covering 0.511m²

Box Weight: 6.16kg

Matching Pieces: The 152 x 152mm field tile, plus skirting, plain cornice, external corner trim and all ten Artworks mouldings. Windsor Blue is supplied in these formats only.
Delivery

In-stock orders are dispatched within 3–5 working days, with express options available. Special-order and made-to-order ranges carry their own lead time, shown on the product page and confirmed when you order. Pallet, slab, large-format and bathware orders travel on a specialist off-load service — we confirm the timescale and book a date that suits you before dispatch.

Delivery is calculated at checkout from your order and postcode (we do not offer showroom collection) and UK delivery is free on orders over £1,000 on most ranges. For pallet deliveries please tell us about access issues in advance — low trees or bridges, narrow roads or gateways, gravel drives, or no turning or unloading space — as a re-delivery charge may apply if we cannot complete delivery.

When your order arrives

Please check your delivery as soon as it arrives. Once goods are unloaded they become the responsibility of the receiver, so if anything isn’t right, contact us within three working days and we’ll put it right quickly.

Returns

To request a return, contact Hyperion within 14 days of delivery. For eligible online consumer cancellations, you have a further 14 days after telling us to send the goods back. Contact us for the correct return address; your statutory cancellation does not depend on our authorisation.

Additional supplier returns have their own eligibility rules, charges and exclusions. These do not override statutory cancellation rights or rights for faulty goods. See our refund policy and supplier return guidance before arranging a return.

Product Frequently Asked Questions

Can Windsor Blue tiles be used in a shower or wet room?

Yes. The glaze is impervious and unaffected by constant water, so these tiles are entirely at home in a shower enclosure, above a bath, behind a sink or across a wet-room wall. What matters is what sits behind and between them: a properly tanked substrate, a white flexible adhesive and a grout rated for wet areas. The tiles themselves never need sealing.

Can I use these on the floor?

No — Artworks is a wall range only. The ceramic body is not rated for foot traffic and the gloss glaze would scratch and lose its shine quickly underfoot. If you want a floor beneath a Windsor Blue wall, a geometric or encaustic-effect floor tile is the natural partner, and our team can help you pair one.

Will the colour be consistent across my order?

The Artworks glazes are applied over a pressed ceramic body, and slight variation from tile to tile is part of the character rather than a fault — it is what keeps a large tiled wall from looking printed. On a gloss mid-blue that variation reads as depth rather than as patchiness. Order the whole of a room in one go where you can, and mix tiles from several boxes as you set out rather than working box by box.

What adhesive and grout should I use with Windsor Blue?

Use a white flexible adhesive. The grout is a real design decision here rather than a default. Brilliant white is a legitimate choice — it puts the tile squarely in the blue-and-white tradition and makes the wall read crisp and graphic — but it emphasises every joint, so your setting-out has to be accurate and the effect is a grid as much as a colour. If you would rather the blue carried the wall and the joints stayed quiet, use a soft mid-grey a shade or two lighter than the tile. The one to avoid is a warm beige or greige, which muddies a clean mid-blue and does it no favours. Grout haze shows readily on gloss, so sponge each section as you go.

Is Windsor Blue in stock, and how quickly can I have it?

The range is usually held in stock and we can normally despatch within a few working days; mouldings and trims occasionally run on a longer lead time, so it is worth a call on 01344 620211 before you plan the fitting week. UK delivery is free on orders over £1,000, and we can hold a delivery back until your site is ready.

How does Windsor Blue compare with the other blues in the Artworks range?

Windsor Blue is the versatile one. Original Style describe it as a versatile mid-blue, rich and glossy, like looking into deep water — and that is the point of it: it sits in the middle of the family, without the strong cast that makes the others more specific. The alternatives each pull in a direction. One is a warmer blue with a green cast to it. One is a deep indigo for a much more dramatic room. One is a blue-grey that shifts with the light and reads almost as a neutral. If you want a blue that behaves like a blue and works with most schemes, this is usually the answer — but order cut samples of two or three and look at them on the actual wall, because blues change more between rooms than any other family in the range.

Can I see a sample before I order?

Yes. Cut samples are free to collect from our Ascot showroom, or we can post one to you for the cost of postage. Seeing the glaze in your own light is the surest way to judge how it will sit against your paint, stone and metalwork.

How much extra should I order for cuts and wastage?

As a guide, add around 10% to your measured area for cuts and breakages, and nearer 15% for a herringbone, diagonal or brick-bond layout. It is also worth keeping a few spare tiles from the same batch in case a repair is ever needed.

Which pieces are available in Windsor Blue?

Fifteen: the 152mm field tile and its half tile, a skirting tile, a plain cornice, an external corner trim, and ten mouldings — Victoria, Egg & Dart, Dentil, Hogarth, Albert, Rope, Astragal, Scroll, Sigma and Omega. Windsor Blue is not made as a large brick or as a bevelled metro tile, so a scheme needing one of those formats will have to take it from a different colour. Original Style also make rectangles, round-edge tiles, internal corners and corner wrapping pieces to order in this colour — those carry minimum quantities and longer lead times, so call us on 01344 620211 if you need one.

What is the half tile for?

It is a 152 x 76mm brick — the field tile halved along its length. Laid on its own in a running bond it gives a finer, busier wall than the square tile. Used a course or two at a time it becomes a border, a banding or a stall riser, or the shallow filler above a bath where a full tile would have to be cut down. A 152 x 76mm tile covers 0.011552m², so a square metre takes about 87; boxes hold 44 and cover 0.511m² as supplied.

Should I use white grout for a blue-and-white look?

You can, and it is the historically correct choice if blue and white is what you are after — it draws a clean pale grid across the wall and each tile reads as a separate square, which is exactly the Delft and spongeware effect. Two things to know before you commit. It puts every joint on display, so the setting-out has to be good and any wander in the courses will show. And it makes the wall read as a pattern rather than as a field of colour, which is lovely in a small area such as a splashback and can be busy across a whole room. A soft mid-grey gives you the blue without the grid; white gives you the tradition. Come and see both in the showroom if you are torn.

Didn’t find your answer?

Don't hesitate to contact us

The Hyperion Family Promise

Our family-run Ascot team is here to help you choose with confidence, check the practical details and plan your project.

Ask us about available samples, quantities and delivery before you commit. Returns and delivery terms depend on the product and supplier.

Read delivery and returns information
Installation & Care Tips

Installation & care

  • Adhesive & Grout: White flexible adhesive throughout. On the grout there are two honest routes. White belongs to the blue-and-white tradition and makes the courses read sharply, though it will expose any drift in your gauge and demands careful setting-out. A soft mid-grey, chosen slightly lighter in tone than the glaze, does the opposite and hands the wall back to the colour. A warm beige or greige will cloud the blue — avoid both. Clear any haze from the surface before it dries on.
  • Layout: Decide the bond before you set out. Stack bond keeps the vertical joints continuous and makes a wall read calmly; a half-lap running bond stretches the courses horizontally and is more forgiving of a wall that is not quite true. Use half tiles to close a course wherever you can rather than cutting a full square. Gauge that first course carefully — with a narrow module, any error multiplies quickly as the wall goes up.
  • Cleaning: The gloss glaze is non-porous and needs no sealing. Wipe with warm water and a mild detergent; avoid abrasive pads and acidic limescale removers, which will dull the surface over time.
PLAN IT ONCE. KEEP IT TOGETHER.

My Project

Saved on this device while you keep browsing.

♡ Compare saved designs →
Shortlist designs first. Save quantities when you are ready.