Hyperion Tiles Ascot BerkshireBEAUTY IN EVERY DETAIL

Product details

Product story

A Top Edge With Substance

Seventy-five millimetres of face on a 152mm length, standing proud of the wall to close the top of a tiled run: the Artworks Ascot Blue Plain Cornice, from Hyperion Tiles, your official Original Style stockist.

This piece works by projection. It sits forward of the tiling and throws a horizontal shadow beneath itself, so a half-height wall arrives at a considered top rather than simply running out at the last course. The face is smooth and the section generous, and that is what gives the shadow its weight. Boxes contain 4 lengths covering 0.6 linear metres; a 152mm length repeats 6.6 times along a metre of wall.

Fixed at height, the piece is largely seen from below, and its underside sits out of the daylight whatever the hour — so the cap tends to hold a steady, quiet grey while the tiling beneath it shifts about through the day. Set at dado height it gives a room a horizontal it did not previously have; taken up to picture-rail height it caps a taller panel of tiling. In a bathroom or a cloakroom it is the piece that shows the tiling was designed to end where it ends.

Product specification

Product Name: Artworks Ascot Blue Plain Cornice

Brand: Original Style

Collection: Artworks

Material: Glazed Ceramic

Finish: Gloss

Colour: Ascot Blue

Tile Size: 152 x 75mm (15.2 x 7.5cm)

Edge Finish: Plain projecting cornice profile

Suitability: Internal Walls — wet and dry areas

Frostproof: No — internal use only

Sealing: Not required

Sold By: The Box — 4 pieces per box, covering 0.6 linear metres

Box Weight: 1.20kg

Matching Pieces: Eighteen pieces in the range. Plain Cornice caps flat tiling in Half Tile, Large Brick 228x75mm, Field Tile, Metro Bevelled Tile 75x75mm or Metro Bevelled Tile 150x75mm, with Skirting Tile and External Corner completing the trims. Mouldings: Egg & Dart, Dentil, Rope, Scroll, Victoria, Astragal, Sigma, Omega Dado, Hogarth and Albert.
Samples

See the whole tile before you decide. A full-tile sample is available for this product, so you can judge the complete pattern, colour and finish in your own light.

The sample is £14.89. Sample postage from £8 per supplier. Eligible sample buyers receive a fixed £8 credit on a £50+ tile order, once per customer. This is not a refund of combined multi-supplier postage.

Use the sample option in the buying panel above to add it to your basket. Review your samples and the combined postage at checkout before paying.

Delivery

In-stock orders are dispatched within 3–5 working days, with express options available. Special-order and made-to-order ranges carry their own lead time, shown on the product page and confirmed when you order. Pallet, slab, large-format and bathware orders travel on a specialist off-load service — we confirm the timescale and book a date that suits you before dispatch.

Delivery is calculated at checkout from your order and postcode (we do not offer showroom collection) and UK delivery is free on orders over £1,000 on most ranges. For pallet deliveries please tell us about access issues in advance — low trees or bridges, narrow roads or gateways, gravel drives, or no turning or unloading space — as a re-delivery charge may apply if we cannot complete delivery.

When your order arrives

Please check your delivery as soon as it arrives. Once goods are unloaded they become the responsibility of the receiver, so if anything isn’t right, contact us within three working days and we’ll put it right quickly.

Returns

To request a return, contact Hyperion within 14 days of delivery. For eligible online consumer cancellations, you have a further 14 days after telling us to send the goods back. Contact us for the correct return address; your statutory cancellation does not depend on our authorisation.

Additional supplier returns have their own eligibility rules, charges and exclusions. These do not override statutory cancellation rights or rights for faulty goods. See our refund policy and supplier return guidance before arranging a return.

Product Frequently Asked Questions

Can Ascot Blue tiles be used in a shower or wet room?

Yes. The glaze is impervious and unaffected by constant water, so these tiles are entirely at home in a shower enclosure, above a bath, behind a sink or across a wet-room wall. What matters is what sits behind and between them: a properly tanked substrate, a white flexible adhesive and a grout rated for wet areas. The tiles themselves never need sealing.

Can I use these on the floor?

No — Artworks is a wall range only. The ceramic body is not rated for foot traffic and the gloss glaze would scratch and lose its shine quickly underfoot. For a floor to sit beneath an Ascot Blue wall, a black and white geometric or an encaustic-effect tile is the natural partner, and our team can help you pair one.

Will the colour be consistent across my order?

The Artworks glazes are applied over a pressed ceramic body, and slight variation from tile to tile is part of the character rather than a fault — it is what stops a large tiled wall looking printed. Ascot Blue shows it a little more than most, because the balance of blue and grey shifts across the surface as well as with the light. Order the whole of a room in one go where you can, and mix tiles from several boxes as you set out rather than working box by box.

What adhesive and grout should I use with Ascot Blue?

Use a white flexible adhesive. Grout is unusually consequential on this colour, because it decides which way the tile reads. Ascot Blue sits between blue and grey, and the joint tips the balance: a cooler, faintly blue-toned grey brings the blue forward, while a warm grey or greige lets the grey side dominate. If you want it to keep both readings and stay ambiguous, match the grout closely in tone and let the wall shift on its own. The one to think hard about is brilliant white — on a colour this quiet it becomes the loudest thing on the wall, and the tile loses what little contrast it has. Grout haze shows readily on gloss, so sponge each section as you go.

Is Ascot Blue in stock, and how quickly can I have it?

The range is usually held in stock and we can normally despatch within a few working days; mouldings and trims occasionally run on a longer lead time, so it is worth a call on 01344 620211 before you plan the fitting week. UK delivery is free on orders over £1,000, and we can hold a delivery back until your site is ready.

How does Ascot Blue compare with the other blues in the Artworks range?

Ascot Blue is the quiet one, and the only one that will not settle on a single reading. Original Style describe it as a blueish-grey or a greyish-blue depending on the light it is seen in — classic and understated. The other three commit: one is a warmer blue with a green cast, one a versatile mid-blue, and one a deep indigo that behaves like a dark colour. If you want a blue that behaves like a soft neutral and changes through the day, this is the one. Order cut samples of two or three and live with them on the wall for a day before choosing.

Can I see a sample before I order?

Yes. Cut samples are free to collect from our Ascot showroom, or we can post one to you for the cost of postage. Seeing the glaze in your own light is the surest way to judge how it will sit against your paint, stone and metalwork.

How much extra should I order for cuts and wastage?

As a guide, add around 10% to your measured area for cuts and breakages, and nearer 15% for a herringbone, diagonal or brick-bond layout. It is also worth keeping a few spare tiles from the same batch in case a repair is ever needed.

Why does Ascot Blue look different at different times of day?

Because that is what the colour is. It sits on the line between blue and grey, so whatever light is in the room decides which side comes forward. Cool north light and an overcast morning pull it towards grey; warm afternoon and evening light, or a warm bulb, bring the blue out. It is the most useful thing to know about this tile, and the reason a single glance at a sample is not enough. Tape a sample to the wall and look at it at the times you actually use the room — first thing, mid-afternoon, and after dark with the lights on. If you want to steer it one way, the grout does most of that work.

How do I finish the top of a half-height tiled wall?

With a moulding laid horizontally along the top course. The choice is a matter of weight: the Victoria and Plain Cornice at 75mm give a substantial architectural capping, the Egg & Dart and Dentil carry relief ornament, the Albert, Hogarth and Rope sit in the middle, and the Astragal, Sigma, Scroll and the Omega dado are slim beads for a quieter line. On a colour that changes with the light, a modelled profile earns its keep twice over, since the curves and hollows catch the light at different angles and hold both readings of the colour at once. All are supplied four to a box covering 0.6 linear metres. Measure the run, add 10%, and round up.

Didn’t find your answer?

Don't hesitate to contact us

The Hyperion Family Promise

Our family-run Ascot team is here to help you choose with confidence, check the practical details and plan your project.

Ask us about available samples, quantities and delivery before you commit. Returns and delivery terms depend on the product and supplier.

Read delivery and returns information
Installation & Care Tips

Installation & care

  • Adhesive & Grout: Use a white flexible adhesive beneath the cap. Grout kept close to the glaze in tone lets the cap read as one continuous projection rather than a row of separate lengths, which is usually what a cornice wants; a cooler grey brings the blue forward if the wall below calls for it, and a warm grey or greige keeps the whole run on the grey side. Leave brilliant white alone — it breaks the horizontal into segments and undoes the run. Remove residue from the face while it is still workable; a cured bloom on gloss is hard to reverse.
  • Layout: Set the height first and tile up to it, rather than fitting the cap to whatever course the tiling happens to reach. Plan the run so that full lengths land at the visible ends of a wall. At a projecting angle, the External Corner in the same glaze carries the capped wall round the return.
  • Cleaning: The gloss glaze is non-porous and needs no sealing. Wipe with warm water and a mild detergent; avoid abrasive pads and acidic limescale removers, which will dull the surface over time.
PLAN IT ONCE. KEEP IT TOGETHER.

My Project

Saved on this device while you keep browsing.

♡ Compare saved designs →
Shortlist designs first. Save quantities when you are ready.