Product details

Product story

One Tile, Both Readings

The chamfer takes light at one angle and the flat face takes it at another, across 150 x 75mm of gloss: the Artworks Ascot Blue Metro Bevelled Tile, from Hyperion Tiles, your official Original Style stockist.

A bevelled metro in the classic proportion, 10mm thick, the edge chamfered down on all four sides so every tile sits within its own shallow frame. A 150 x 75mm tile covers 0.01125m², so a square metre of wall takes about 89 of them. Boxes hold 38 tiles and cover 0.442m² as supplied.

On this colour the chamfer earns its keep. The angled facet and the flat centre meet the light from different directions, so a single tile can show the blue side and the grey side at the same moment, and a wall of them holds both readings at once rather than choosing between them. Pewter, zinc, brushed nickel and unpolished chrome all sit comfortably against it, and brass moves it in a warmer direction if you prefer that. It is rated for internal walls including wet areas, so a shower, a bathroom or a splashback are all within its range.

Specifications

Product Name: Artworks Ascot Blue Metro Bevelled Tile

Brand: Original Style

Collection: Artworks

Material: Glazed Ceramic

Finish: Gloss

Colour: Ascot Blue

Tile Size: 150 x 75 x 10mm (15.0 x 7.5cm)

Edge Finish: Bevelled

Suitability: Internal Walls — wet and dry areas

Frostproof: No — internal use only

Sealing: Not required

Sold By: The Box — 38 tiles per box, covering 0.442m²

Box Weight: 6.46kg

Matching Pieces: The colourway numbers eighteen pieces: Metro Bevelled Tile 150x75mm alongside Metro Bevelled Tile 75x75mm, Half Tile, Field Tile and Large Brick 228x75mm; Skirting Tile, External Corner and Plain Cornice; and Hogarth, Albert, Sigma, Omega Dado, Astragal, Victoria, Rope, Scroll, Dentil and Egg & Dart in the mouldings.

Installation & care

Installation & care

  • Adhesive & Grout: Use white flexible adhesive. Where the chamfers meet, grout sits in a shallow channel and is very much on show: greige or a warm grey pushes the wall towards grey, a cool grey draws the blue up, and a close tonal match leaves the bevel to do the dividing on its own. Do not reach for brilliant white — it overrides the chamfer's own shadow and flattens what the bevel is doing. Take the haze off the angled facets as you go, since they hold residue longer than the flat face.
  • Layout: Half bond is the default here; a stack bond or an upright stack changes the character of the wall without changing the tile. Keep the joint width consistent, because every tile already carries a shadow of its own and a wandering joint shows up quickly against it.
  • Cleaning: The gloss glaze is non-porous and needs no sealing. Wipe with warm water and a mild detergent; avoid abrasive pads and acidic limescale removers, which will dull the surface over time.
Samples

Tone, glaze and veining all read differently in your own light. Cut samples are free — sample postage is £4.99 (£8 for Original Style) and we refund it on tile orders over £50 with the code we email you. Our family-run team is happy to check quantities and finishes with you on 01344 620211.

Delivery

In-stock orders are dispatched within 3–5 working days, with express options available. Special-order and made-to-order ranges carry their own lead time, shown on the product page and confirmed when you order. Pallet, slab, large-format and bathware orders travel on a specialist off-load service — we confirm the timescale and book a date that suits you before dispatch.

Delivery is calculated at checkout from your order and postcode (we do not offer showroom collection) and UK delivery is free on orders over £1,000 on most ranges. For pallet deliveries please tell us about access issues in advance — low trees or bridges, narrow roads or gateways, gravel drives, or no turning or unloading space — as a re-delivery charge may apply if we cannot complete delivery.

When your order arrives

Please check your delivery as soon as it arrives. Once goods are unloaded they become the responsibility of the receiver, so if anything isn’t right, contact us within three working days and we’ll put it right quickly.

Returns

Unused, complete orders can be returned within 14 days of delivery; as tiles are picked and packed to your quantity, a restocking fee of 20–30% applies depending on the range. Special-order items are non-returnable unless damaged on delivery or faulty. Ordering a free sample first is the simplest way to avoid a return.

Product Frequently Asked Questions

Can Ascot Blue tiles be used in a shower or wet room?

Yes. The glaze is impervious and unaffected by constant water, so these tiles are entirely at home in a shower enclosure, above a bath, behind a sink or across a wet-room wall. What matters is what sits behind and between them: a properly tanked substrate, a white flexible adhesive and a grout rated for wet areas. The tiles themselves never need sealing.

Can I use these on the floor?

No — Artworks is a wall range only. The ceramic body is not rated for foot traffic and the gloss glaze would scratch and lose its shine quickly underfoot. For a floor to sit beneath an Ascot Blue wall, a black and white geometric or an encaustic-effect tile is the natural partner, and our team can help you pair one.

Will the colour be consistent across my order?

The Artworks glazes are applied over a pressed ceramic body, and slight variation from tile to tile is part of the character rather than a fault — it is what stops a large tiled wall looking printed. Ascot Blue shows it a little more than most, because the balance of blue and grey shifts across the surface as well as with the light. Order the whole of a room in one go where you can, and mix tiles from several boxes as you set out rather than working box by box.

What adhesive and grout should I use with Ascot Blue?

Use a white flexible adhesive. Grout is unusually consequential on this colour, because it decides which way the tile reads. Ascot Blue sits between blue and grey, and the joint tips the balance: a cooler, faintly blue-toned grey brings the blue forward, while a warm grey or greige lets the grey side dominate. If you want it to keep both readings and stay ambiguous, match the grout closely in tone and let the wall shift on its own. The one to think hard about is brilliant white — on a colour this quiet it becomes the loudest thing on the wall, and the tile loses what little contrast it has. Grout haze shows readily on gloss, so sponge each section as you go.

Is Ascot Blue in stock, and how quickly can I have it?

The range is usually held in stock and we can normally despatch within a few working days; mouldings and trims occasionally run on a longer lead time, so it is worth a call on 01344 620211 before you plan the fitting week. UK delivery is free on orders over £1,000, and we can hold a delivery back until your site is ready.

How does Ascot Blue compare with the other blues in the Artworks range?

Ascot Blue is the quiet one, and the only one that will not settle on a single reading. Original Style describe it as a blueish-grey or a greyish-blue depending on the light it is seen in — classic and understated. The other three commit: one is a warmer blue with a green cast, one a versatile mid-blue, and one a deep indigo that behaves like a dark colour. If you want a blue that behaves like a soft neutral and changes through the day, this is the one. Order cut samples of two or three and live with them on the wall for a day before choosing.

Can I see a sample before I order?

Yes. Cut samples are free to collect from our Ascot showroom, or we can post one to you for the cost of postage. Seeing the glaze in your own light is the surest way to judge how it will sit against your paint, stone and metalwork.

How much extra should I order for cuts and wastage?

As a guide, add around 10% to your measured area for cuts and breakages, and nearer 15% for a herringbone, diagonal or brick-bond layout. It is also worth keeping a few spare tiles from the same batch in case a repair is ever needed.

Why does Ascot Blue look different at different times of day?

Because that is what the colour is. It sits on the line between blue and grey, so whatever light is in the room decides which side comes forward. Cool north light and an overcast morning pull it towards grey; warm afternoon and evening light, or a warm bulb, bring the blue out. It is the most useful thing to know about this tile, and the reason a single glance at a sample is not enough. Tape a sample to the wall and look at it at the times you actually use the room — first thing, mid-afternoon, and after dark with the lights on. If you want to steer it one way, the grout does most of that work.

What does the bevelled edge do?

The chamfer around each face catches light along its top and casts a fine shadow beneath, so every tile is outlined before the grout goes in. On Ascot Blue that does something the flat formats cannot: the chamfer and the flat face catch the light at different angles, so a single tile can show its blue side and its grey side at once. If you like the shifting quality of this colour, the bevelled metro is the format that shows it off most.

Didn’t find your answer?

Don't hesitate to contact us

PLAN IT ONCE. KEEP IT TOGETHER.

My Project

Saved on this device while you keep browsing.