Hyperion Tiles Ascot BerkshireBEAUTY IN EVERY DETAIL

Product details

Product story

Ogee Curves Holding The Colour

Deep ogee curves modelled into 152 x 75mm of gloss-glazed ceramic, in a rich mid-blue that gathers strength in every hollow: the Artworks Windsor Blue Victoria Moulding, from Hyperion Tiles, your official Original Style stockist.

The Victoria is a classical capping profile — a compound curve, convex above and concave below, of the kind that has finished plasterwork and joinery in English houses for two centuries. At 75mm deep it gives a run of tiling a properly modelled top edge. Fired in gloss, that modelling behaves quite differently from a moulding in paint: the glaze lies thicker where the surface turns inward, so the blue gains depth in the hollows and runs lighter along the crests, and the profile describes itself in tone rather than in outline. At 152mm per piece, a linear metre calls for 6.6. Separately from that, one box holds 4 lengths and covers 0.6 linear metres.

Use it to cap a half-height wall in a room that will carry some formality — a bathroom with panelled joinery, a hallway, a cloakroom with decent ceiling height. It also serves as the upper member of a fuller cornice arrangement, sat above a second profile. Set at eye level or a little over, the ogee takes light on its upper curve and holds shadow beneath, and the colour shifts continuously along the length as you move past it.

Product specification

Product Name: Artworks Windsor Blue Victoria Moulding

Brand: Original Style

Collection: Artworks

Material: Glazed Ceramic

Finish: Gloss

Colour: Windsor Blue

Tile Size: 152 x 75mm (15.2 x 7.5cm)

Edge Finish: Moulded ogee profile in relief, glazed

Suitability: Internal Walls — wet and dry areas

Frostproof: No — internal use only

Sealing: Not required

Sold By: The Box — 4 pieces per box, covering 0.6 linear metres

Box Weight: 0.84kg

Matching Pieces: Field and half tiles, the skirting tile, the external corner trim, the plain cornice and the nine other Artworks mouldings. Windsor Blue is supplied in these formats only.
Samples

See the whole tile before you decide. A full-tile sample is available for this product, so you can judge the complete pattern, colour and finish in your own light.

The sample is £12.36. Sample postage from £8 per supplier. Eligible sample buyers receive a fixed £8 credit on a £50+ tile order, once per customer. This is not a refund of combined multi-supplier postage.

Use the sample option in the buying panel above to add it to your basket. Review your samples and the combined postage at checkout before paying.

Delivery

In-stock orders are dispatched within 3–5 working days, with express options available. Special-order and made-to-order ranges carry their own lead time, shown on the product page and confirmed when you order. Pallet, slab, large-format and bathware orders travel on a specialist off-load service — we confirm the timescale and book a date that suits you before dispatch.

Delivery is calculated at checkout from your order and postcode (we do not offer showroom collection) and UK delivery is free on orders over £1,000 on most ranges. For pallet deliveries please tell us about access issues in advance — low trees or bridges, narrow roads or gateways, gravel drives, or no turning or unloading space — as a re-delivery charge may apply if we cannot complete delivery.

When your order arrives

Please check your delivery as soon as it arrives. Once goods are unloaded they become the responsibility of the receiver, so if anything isn’t right, contact us within three working days and we’ll put it right quickly.

Returns

To request a return, contact Hyperion within 14 days of delivery. For eligible online consumer cancellations, you have a further 14 days after telling us to send the goods back. Contact us for the correct return address; your statutory cancellation does not depend on our authorisation.

Additional supplier returns have their own eligibility rules, charges and exclusions. These do not override statutory cancellation rights or rights for faulty goods. See our refund policy and supplier return guidance before arranging a return.

Product Frequently Asked Questions

Can Windsor Blue tiles be used in a shower or wet room?

Yes. The glaze is impervious and unaffected by constant water, so these tiles are entirely at home in a shower enclosure, above a bath, behind a sink or across a wet-room wall. What matters is what sits behind and between them: a properly tanked substrate, a white flexible adhesive and a grout rated for wet areas. The tiles themselves never need sealing.

Can I use these on the floor?

No — Artworks is a wall range only. The ceramic body is not rated for foot traffic and the gloss glaze would scratch and lose its shine quickly underfoot. If you want a floor beneath a Windsor Blue wall, a geometric or encaustic-effect floor tile is the natural partner, and our team can help you pair one.

Will the colour be consistent across my order?

The Artworks glazes are applied over a pressed ceramic body, and slight variation from tile to tile is part of the character rather than a fault — it is what keeps a large tiled wall from looking printed. On a gloss mid-blue that variation reads as depth rather than as patchiness. Order the whole of a room in one go where you can, and mix tiles from several boxes as you set out rather than working box by box.

What adhesive and grout should I use with Windsor Blue?

Use a white flexible adhesive. The grout is a real design decision here rather than a default. Brilliant white is a legitimate choice — it puts the tile squarely in the blue-and-white tradition and makes the wall read crisp and graphic — but it emphasises every joint, so your setting-out has to be accurate and the effect is a grid as much as a colour. If you would rather the blue carried the wall and the joints stayed quiet, use a soft mid-grey a shade or two lighter than the tile. The one to avoid is a warm beige or greige, which muddies a clean mid-blue and does it no favours. Grout haze shows readily on gloss, so sponge each section as you go.

Is Windsor Blue in stock, and how quickly can I have it?

The range is usually held in stock and we can normally despatch within a few working days; mouldings and trims occasionally run on a longer lead time, so it is worth a call on 01344 620211 before you plan the fitting week. UK delivery is free on orders over £1,000, and we can hold a delivery back until your site is ready.

How does Windsor Blue compare with the other blues in the Artworks range?

Windsor Blue is the versatile one. Original Style describe it as a versatile mid-blue, rich and glossy, like looking into deep water — and that is the point of it: it sits in the middle of the family, without the strong cast that makes the others more specific. The alternatives each pull in a direction. One is a warmer blue with a green cast to it. One is a deep indigo for a much more dramatic room. One is a blue-grey that shifts with the light and reads almost as a neutral. If you want a blue that behaves like a blue and works with most schemes, this is usually the answer — but order cut samples of two or three and look at them on the actual wall, because blues change more between rooms than any other family in the range.

Can I see a sample before I order?

Yes. Cut samples are free to collect from our Ascot showroom, or we can post one to you for the cost of postage. Seeing the glaze in your own light is the surest way to judge how it will sit against your paint, stone and metalwork.

How much extra should I order for cuts and wastage?

As a guide, add around 10% to your measured area for cuts and breakages, and nearer 15% for a herringbone, diagonal or brick-bond layout. It is also worth keeping a few spare tiles from the same batch in case a repair is ever needed.

Which pieces are available in Windsor Blue?

Fifteen: the 152mm field tile and its half tile, a skirting tile, a plain cornice, an external corner trim, and ten mouldings — Victoria, Egg & Dart, Dentil, Hogarth, Albert, Rope, Astragal, Scroll, Sigma and Omega. Windsor Blue is not made as a large brick or as a bevelled metro tile, so a scheme needing one of those formats will have to take it from a different colour. Original Style also make rectangles, round-edge tiles, internal corners and corner wrapping pieces to order in this colour — those carry minimum quantities and longer lead times, so call us on 01344 620211 if you need one.

How do I finish the top of a half-height tiled wall?

With a moulding laid horizontally along the top course. The choice is a matter of weight: the Victoria and Plain Cornice at 75mm give a substantial architectural capping, the Egg & Dart and Dentil carry relief ornament, the Albert, Hogarth and Rope sit in the middle, and the Astragal, Sigma, Scroll and Omega are slim beads for a quieter line. All are supplied four to a box covering 0.6 linear metres. Measure the run, add 10%, and round up to whole boxes.

Didn’t find your answer?

Don't hesitate to contact us

The Hyperion Family Promise

Our family-run Ascot team is here to help you choose with confidence, check the practical details and plan your project.

Ask us about available samples, quantities and delivery before you commit. Returns and delivery terms depend on the product and supplier.

Read delivery and returns information
Installation & Care Tips

Installation & care

  • Adhesive & Grout: Fix on white flexible adhesive. Grout is a real decision on this blue. White is the traditional answer and a good one, delivering the crisp blue-and-white result, at the cost of showing every joint — set the pieces out accurately and it looks entirely intentional. A soft mid-grey, a touch lighter in tone than the glaze, keeps the jointing unobtrusive instead. Warm beige and greige shades are the ones that muddy a mid-blue; leave them out of it. Work the grout into the joints only and keep it clear of the ogee hollows, since grout trapped in a curve dries light and flattens the modelling. Clear haze from the gloss before it sets.
  • Layout: Decide the height first: a capping moulding is read from below, so a few centimetres either way changes how much of the curve you actually see. Dry-lay the run to place the joints, and centre the setting-out on the wall that carries the room. Butt the pieces tightly so the profile stays continuous — a break in an ogee shows more than a break in a flat face. Where the run turns outward, the External Corner Trim keeps a glazed edge on the angle.
  • Cleaning: The gloss glaze is non-porous and needs no sealing. Wipe with warm water and a mild detergent; avoid abrasive pads and acidic limescale removers, which will dull the surface over time.
PLAN IT ONCE. KEEP IT TOGETHER.

My Project

Saved on this device while you keep browsing.

♡ Compare saved designs →
Shortlist designs first. Save quantities when you are ready.