Hyperion Tiles Ascot BerkshireBEAUTY IN EVERY DETAIL

Product details

Product story

The Classical Bead, Rounding a Change of Plane

The half-round bead of the classical orders, drawn in glazed ceramic at 152 x 21mm and finished in deep indigo gloss: the Artworks Royal Blue Astragal Moulding, from Hyperion Tiles, your official Original Style stockist.

The astragal is a piece of architectural vocabulary with a long pedigree — the small convex bead set beneath the capital in the Doric and Ionic orders, later adopted wholesale by joiners, who used it to divide glazing bars, edge panelling and finish the meeting stile of a door. Its section is a simple semicircle, and its purpose has always been the same: to round the place where one plane meets another, so that the junction is described by a curve.

A half-round is the profile a gloss glaze flatters most directly. The curve gives light a continuously changing surface to travel across, so a single bead carries a whole gradient of the indigo along its length, brightest where it faces you and at its full weight of colour where it rolls away. Use it to trim the edge of a tiled panel, to finish the top of a low run, or to sit under a deeper capping as a slim secondary member. Where the bead has to turn an external angle, the Royal Blue trim made for outside corners, 152 x 30mm, is stocked here for precisely that job.

Product specification

Product Name: Artworks Royal Blue Astragal Moulding

Brand: Original Style

Collection: Artworks

Material: Glazed Ceramic

Finish: Gloss

Colour: Royal Blue

Tile Size: 152 x 21mm (15.2 x 2.1cm)

Edge Finish: Moulded — half-round bead, straight ends

Suitability: Internal Walls — wet and dry areas

Frostproof: No — internal use only

Sealing: Not required

Sold By: The Box — 4 pieces per box, covering 0.6 linear metres

Box Weight: 0.24kg

Matching Pieces: At home with all eighteen Royal Blue pieces: field, half, large brick, the two bevelled metro tiles, skirting tile, plain cornice, corner trim for outside angles and the nine other mouldings
Samples

See the whole tile before you decide. A full-tile sample is available for this product, so you can judge the complete pattern, colour and finish in your own light.

The sample is £9.49. Sample postage from £8 per supplier. Eligible sample buyers receive a fixed £8 credit on a £50+ tile order, once per customer. This is not a refund of combined multi-supplier postage.

Use the sample option in the buying panel above to add it to your basket. Review your samples and the combined postage at checkout before paying.

Delivery

In-stock orders are dispatched within 3–5 working days, with express options available. Special-order and made-to-order ranges carry their own lead time, shown on the product page and confirmed when you order. Pallet, slab, large-format and bathware orders travel on a specialist off-load service — we confirm the timescale and book a date that suits you before dispatch.

Delivery is calculated at checkout from your order and postcode (we do not offer showroom collection) and UK delivery is free on orders over £1,000 on most ranges. For pallet deliveries please tell us about access issues in advance — low trees or bridges, narrow roads or gateways, gravel drives, or no turning or unloading space — as a re-delivery charge may apply if we cannot complete delivery.

When your order arrives

Please check your delivery as soon as it arrives. Once goods are unloaded they become the responsibility of the receiver, so if anything isn’t right, contact us within three working days and we’ll put it right quickly.

Returns

To request a return, contact Hyperion within 14 days of delivery. For eligible online consumer cancellations, you have a further 14 days after telling us to send the goods back. Contact us for the correct return address; your statutory cancellation does not depend on our authorisation.

Additional supplier returns have their own eligibility rules, charges and exclusions. These do not override statutory cancellation rights or rights for faulty goods. See our refund policy and supplier return guidance before arranging a return.

Product Frequently Asked Questions

Can Royal Blue tiles be used in a shower or wet room?

Yes. The glaze is impervious and unaffected by constant water, so these tiles are entirely at home in a shower enclosure, above a bath, behind a sink or across a wet-room wall. What matters is what sits behind and between them: a properly tanked substrate, a white flexible adhesive and a grout rated for wet areas. The tiles themselves never need sealing.

Can I use these on the floor?

No — Artworks is a wall range only. The ceramic body is not rated for foot traffic and the gloss glaze would scratch and lose its shine quickly underfoot. For a floor to sit beneath a Royal Blue wall, a black and white geometric or an encaustic-effect tile is the natural partner, and our team can help you pair one.

Will the colour be consistent across my order?

The Artworks glazes are applied over a pressed ceramic body, and slight variation from tile to tile is part of the character rather than a fault — it is what stops a large tiled wall looking printed. On a colour this deep the variation reads as movement in the glaze rather than as patchiness. Order the whole of a room in one go where you can, and mix tiles from several boxes as you set out rather than working box by box.

What adhesive and grout should I use with Royal Blue?

Use a white flexible adhesive. For grout, go dark and close in tone: a deep grey, a charcoal, or a blue-grey pitched near the tile's own depth. Against an indigo this deep, brilliant white draws a bright net across the wall and the tile ends up disappearing behind its own joints. A mid grey is the other one to avoid — too light to belong to the colour and too dark to read as a deliberate contrast, so it simply looks tired. Grout haze shows more readily on a deep gloss glaze than on a pale one, so sponge each section down as you go rather than leaving it.

Is Royal Blue in stock, and how quickly can I have it?

The range is usually held in stock and we can normally despatch within a few working days; mouldings and trims occasionally run on a longer lead time, so it is worth a call on 01344 620211 before you plan the fitting week. UK delivery is free on orders over £1,000, and we can hold a delivery back until your site is ready.

How does Royal Blue compare with the other blues in the Artworks range?

Royal Blue is the deep one. Original Style describe it as a deep indigo with an air of nobility, and it is the only blue in the range that behaves like a dark colour rather than a coloured one — it absorbs light where the others return it. The alternatives are all lighter and all pull in different directions: one is a warmer blue with a green cast, one a versatile mid-blue, and one a blue-grey that shifts with the light and reads almost as a neutral. If you are weighing Royal Blue against any of them, order cut samples of both and look at them on the actual wall at the time of day you use the room — a colour this deep changes more between rooms than a mid-tone does.

Can I see a sample before I order?

Yes. Cut samples are free to collect from our Ascot showroom, or we can post one to you for the cost of postage. Seeing the glaze in your own light is the surest way to judge how it will sit against your paint, stone and metalwork.

How much extra should I order for cuts and wastage?

As a guide, add around 10% to your measured area for cuts and breakages, and nearer 15% for a herringbone, diagonal or brick-bond layout. It is also worth keeping a few spare tiles from the same batch in case a repair is ever needed.

Which pieces are available in Royal Blue?

Eighteen — the fullest set of any of the blues. The 152mm field tile and its half tile, a 228 x 75mm large brick, bevelled metro tiles in 150 x 75mm and 75 x 75mm, a skirting tile, a plain cornice, an external corner trim, and ten mouldings: Victoria, Egg & Dart, Dentil, Hogarth, Albert, Rope, Astragal, Scroll, Sigma and Omega. Original Style also make rectangles, round-edge tiles, internal corners and corner wrapping pieces to order in this colour — those carry minimum quantities and longer lead times, so call us on 01344 620211 if a scheme needs one.

How do I finish the top of a half-height tiled wall?

With a moulding laid horizontally along the top course. The choice is a matter of weight: the Victoria and Plain Cornice at 75mm give a substantial architectural capping, the Egg & Dart and Dentil carry relief ornament, the Albert, Hogarth and Rope sit in the middle, and the Astragal, Sigma, Scroll and Omega are slim beads for a quieter line. On a deep colour a moulding earns its keep twice over, since the modelling gives the glaze somewhere to gather and the top of the run gets a defined edge rather than stopping dead. All are supplied four to a box covering 0.6 linear metres. Measure the run, add 10%, and round up.

Didn’t find your answer?

Don't hesitate to contact us

The Hyperion Family Promise

Our family-run Ascot team is here to help you choose with confidence, check the practical details and plan your project.

Ask us about available samples, quantities and delivery before you commit. Returns and delivery terms depend on the product and supplier.

Read delivery and returns information
Installation & Care Tips

Installation & care

  • Adhesive & Grout: Fix with white flexible adhesive and keep the grout dark and close: a charcoal, or a blue-grey pitched to within a shade of the bead itself. On a bead this narrow a brilliant white joint is a bright interruption in what ought to be one smooth roll of colour. A mid grey is equally unhelpful. The whole point of a half-round is that the eye follows the roll of the curve from one piece to the next, and a middling joint parks a small grey block at every 152mm, so the curve is read as a series of short arcs instead of one continuous line. Deep gloss shows haze more readily than a matt finish, so rinse with clean water and buff dry with a soft cloth.
  • Layout: Set the bead out so that full pieces land at the visible ends of the run and any cut is hidden at an internal corner or behind a fitting. Keep the joints tight so the curve carries on unbroken from piece to piece, and check the bead is dead level along its length before the adhesive grabs.
  • Cleaning: The gloss glaze is non-porous and needs no sealing. Wipe with warm water and a mild detergent; avoid abrasive pads and acidic limescale removers, which will dull the surface over time.
PLAN IT ONCE. KEEP IT TOGETHER.

My Project

Saved on this device while you keep browsing.

♡ Compare saved designs →
Shortlist designs first. Save quantities when you are ready.