Free cut samplesFREE UK DELIVERY OVER £1,000EXPERT ADVICEASCOT SHOWROOM
Hyperion Tiles Ascot BerkshireBEAUTY IN EVERY DETAIL
Floor Tiles
Wall Tiles
Bathroom Tiles
Kitchen Tiles
Outdoor Tiles
Flooring
Paint
Brands
Showroom

Product details

Product story

Flush With the Field, at Seven Millimetres

Seven millimetres deep, the same body thickness as the Artworks field tile, in a 152 x 26mm gloss ceramic profile: the Artworks Royal Blue Sigma Moulding, from Hyperion Tiles, your official Original Style stockist.

The Sigma's defining figure is its 7mm body. That is exactly the thickness of the Royal Blue field tile, which means it beds into the same adhesive on the same plane and finishes level with the tiling around it. Its face carries a shallow ogee — a gentle S-curve, which is where the name comes from — so the line is drawn by the shape of the surface itself. Use it as a division within a tiled area, as a slim border to a panel, or as the finish where tiling meets plaster on a single plane.

On a deep indigo the flush finish has a particular value. A colour this dark absorbs light rather than reflecting it back into the room, and the wall reads as one continuous plane of colour; a division that stays within that plane keeps the effect whole while still giving the tiling an ordering line. That makes it a natural top edge for a half-height run — full depth below, pale paint or plaster above, and the change of material handled without a ledge. It is equally at home inside a shower enclosure, where the tiling goes full height and a division is wanted within the surface.

Product specification

Product Name: Artworks Royal Blue Sigma Moulding

Brand: Original Style

Collection: Artworks

Material: Glazed Ceramic

Finish: Gloss

Colour: Royal Blue

Tile Size: 152 x 26 x 7mm (15.2 x 2.6 x 0.7cm)

Edge Finish: Moulded — shallow ogee face on a 7mm body, straight ends

Suitability: Internal Walls — wet and dry areas

Frostproof: No — internal use only

Sealing: Not required

Sold By: The Box — 4 pieces per box, covering 0.6 linear metres

Box Weight: 0.28kg

Matching Pieces: Shares its 7mm body with the Royal Blue field tile and its glaze with the half tile, the large brick, both bevelled metro formats, the skirting, the plain cornice, the external corner trim and nine sibling mouldings
Samples

See the whole tile before you decide. A full-tile sample is available for this product, so you can judge the complete pattern, colour and finish in your own light.

The sample is £7.99.Sample postage is £8 for Original Style and is refunded on tile orders £50+ using the code emailed with your sample order. Choose Full Tile Sample in the buying panel to order it.

Delivery

In-stock orders are dispatched within 3–5 working days, with express options available. Special-order and made-to-order ranges carry their own lead time, shown on the product page and confirmed when you order. Pallet, slab, large-format and bathware orders travel on a specialist off-load service — we confirm the timescale and book a date that suits you before dispatch.

Delivery is calculated at checkout from your order and postcode (we do not offer showroom collection) and UK delivery is free on orders over £1,000 on most ranges. For pallet deliveries please tell us about access issues in advance — low trees or bridges, narrow roads or gateways, gravel drives, or no turning or unloading space — as a re-delivery charge may apply if we cannot complete delivery.

When your order arrives

Please check your delivery as soon as it arrives. Once goods are unloaded they become the responsibility of the receiver, so if anything isn’t right, contact us within three working days and we’ll put it right quickly.

Returns

Unused, complete orders can be returned within 14 days of delivery; as tiles are picked and packed to your quantity, a restocking fee of 20–30% applies depending on the range. Special-order items are non-returnable unless damaged on delivery or faulty. Ordering a free sample first is the simplest way to avoid a return.

Product Frequently Asked Questions

Can Royal Blue tiles be used in a shower or wet room?

Yes. The glaze is impervious and unaffected by constant water, so these tiles are entirely at home in a shower enclosure, above a bath, behind a sink or across a wet-room wall. What matters is what sits behind and between them: a properly tanked substrate, a white flexible adhesive and a grout rated for wet areas. The tiles themselves never need sealing.

Can I use these on the floor?

No — Artworks is a wall range only. The ceramic body is not rated for foot traffic and the gloss glaze would scratch and lose its shine quickly underfoot. For a floor to sit beneath a Royal Blue wall, a black and white geometric or an encaustic-effect tile is the natural partner, and our team can help you pair one.

Will the colour be consistent across my order?

The Artworks glazes are applied over a pressed ceramic body, and slight variation from tile to tile is part of the character rather than a fault — it is what stops a large tiled wall looking printed. On a colour this deep the variation reads as movement in the glaze rather than as patchiness. Order the whole of a room in one go where you can, and mix tiles from several boxes as you set out rather than working box by box.

What adhesive and grout should I use with Royal Blue?

Use a white flexible adhesive. For grout, go dark and close in tone: a deep grey, a charcoal, or a blue-grey pitched near the tile's own depth. Against an indigo this deep, brilliant white draws a bright net across the wall and the tile ends up disappearing behind its own joints. A mid grey is the other one to avoid — too light to belong to the colour and too dark to read as a deliberate contrast, so it simply looks tired. Grout haze shows more readily on a deep gloss glaze than on a pale one, so sponge each section down as you go rather than leaving it.

Is Royal Blue in stock, and how quickly can I have it?

The range is usually held in stock and we can normally despatch within a few working days; mouldings and trims occasionally run on a longer lead time, so it is worth a call on 01344 620211 before you plan the fitting week. UK delivery is free on orders over £1,000, and we can hold a delivery back until your site is ready.

How does Royal Blue compare with the other blues in the Artworks range?

Royal Blue is the deep one. Original Style describe it as a deep indigo with an air of nobility, and it is the only blue in the range that behaves like a dark colour rather than a coloured one — it absorbs light where the others return it. The alternatives are all lighter and all pull in different directions: one is a warmer blue with a green cast, one a versatile mid-blue, and one a blue-grey that shifts with the light and reads almost as a neutral. If you are weighing Royal Blue against any of them, order cut samples of both and look at them on the actual wall at the time of day you use the room — a colour this deep changes more between rooms than a mid-tone does.

Can I see a sample before I order?

Yes. Cut samples are free to collect from our Ascot showroom, or we can post one to you for the cost of postage. Seeing the glaze in your own light is the surest way to judge how it will sit against your paint, stone and metalwork.

How much extra should I order for cuts and wastage?

As a guide, add around 10% to your measured area for cuts and breakages, and nearer 15% for a herringbone, diagonal or brick-bond layout. It is also worth keeping a few spare tiles from the same batch in case a repair is ever needed.

Which pieces are available in Royal Blue?

Eighteen — the fullest set of any of the blues. The 152mm field tile and its half tile, a 228 x 75mm large brick, bevelled metro tiles in 150 x 75mm and 75 x 75mm, a skirting tile, a plain cornice, an external corner trim, and ten mouldings: Victoria, Egg & Dart, Dentil, Hogarth, Albert, Rope, Astragal, Scroll, Sigma and Omega. Original Style also make rectangles, round-edge tiles, internal corners and corner wrapping pieces to order in this colour — those carry minimum quantities and longer lead times, so call us on 01344 620211 if a scheme needs one.

How do I finish the top of a half-height tiled wall?

With a moulding laid horizontally along the top course. The choice is a matter of weight: the Victoria and Plain Cornice at 75mm give a substantial architectural capping, the Egg & Dart and Dentil carry relief ornament, the Albert, Hogarth and Rope sit in the middle, and the Astragal, Sigma, Scroll and Omega are slim beads for a quieter line. On a deep colour a moulding earns its keep twice over, since the modelling gives the glaze somewhere to gather and the top of the run gets a defined edge rather than stopping dead. All are supplied four to a box covering 0.6 linear metres. Measure the run, add 10%, and round up.

Didn’t find your answer?

Don't hesitate to contact us

The Hyperion Family Promise

Our family-run Ascot team is here to help you choose with confidence, check the practical details and plan your project.

Ask us about available samples, quantities and delivery before you commit. Returns and delivery terms depend on the product and supplier.

Read delivery and returns information

Installation & Care Tips

Installation & care

  • Adhesive & Grout: White flexible adhesive, with the grout kept dark and close — a charcoal, or a deep blue-grey within a shade or two of the field. Because the Sigma beds level with the field, its joints are read as part of the tiling, and a brilliant white grout would announce every one of them across an otherwise even wall. A mid grey is the middle failure, and on a flush piece it is the most obvious kind: the whole argument for a 7mm body is that the moulding belongs to the same plane as the tiling, and a joint of undecided tone draws a boundary exactly where you have gone to some trouble not to have one. Haze sits more visibly on a deep gloss glaze, so sponge thoroughly and change the water often.
  • Layout: Because it shares the field tile's 7mm body, the Sigma is set in the same bed and in the same course as the tiling around it. Plan it as a course of the layout rather than as a separate operation, and match the joint widths to the field so the line sits in rhythm with everything beside it.
  • Cleaning: The gloss glaze is non-porous and needs no sealing. Wipe with warm water and a mild detergent; avoid abrasive pads and acidic limescale removers, which will dull the surface over time.
PLAN IT ONCE. KEEP IT TOGETHER.

My Project

Saved on this device while you keep browsing.

♡ Compare saved designs
Shortlist designs first. Save quantities when you are ready.