Ascot Blue Field Tile 152x152mm

Yes. The glaze is impervious and unaffected by constant water, so these tiles are entirely at home in a shower enclosure, above a bath, behind a sink or across a wet-room wall. What matters is what sits behind and between them: a properly tanked substrate, a white flexible adhesive and a grout rated for wet areas. The tiles themselves never need sealing.

No — Artworks is a wall range only. The ceramic body is not rated for foot traffic and the gloss glaze would scratch and lose its shine quickly underfoot. For a floor to sit beneath an Ascot Blue wall, a black and white geometric or an encaustic-effect tile is the natural partner, and our team can help you pair one.

The Artworks glazes are applied over a pressed ceramic body, and slight variation from tile to tile is part of the character rather than a fault — it is what stops a large tiled wall looking printed. Ascot Blue shows it a little more than most, because the balance of blue and grey shifts across the surface as well as with the light. Order the whole of a room in one go where you can, and mix tiles from several boxes as you set out rather than working box by box.

Use a white flexible adhesive. Grout is unusually consequential on this colour, because it decides which way the tile reads. Ascot Blue sits between blue and grey, and the joint tips the balance: a cooler, faintly blue-toned grey brings the blue forward, while a warm grey or greige lets the grey side dominate. If you want it to keep both readings and stay ambiguous, match the grout closely in tone and let the wall shift on its own. The one to think hard about is brilliant white — on a colour this quiet it becomes the loudest thing on the wall, and the tile loses what little contrast it has. Grout haze shows readily on gloss, so sponge each section as you go.

The range is usually held in stock and we can normally despatch within a few working days; mouldings and trims occasionally run on a longer lead time, so it is worth a call on 01344 620211 before you plan the fitting week. UK delivery is free on orders over £1,000, and we can hold a delivery back until your site is ready.

Ascot Blue is the quiet one, and the only one that will not settle on a single reading. Original Style describe it as a blueish-grey or a greyish-blue depending on the light it is seen in — classic and understated. The other three commit: one is a warmer blue with a green cast, one a versatile mid-blue, and one a deep indigo that behaves like a dark colour. If you want a blue that behaves like a soft neutral and changes through the day, this is the one. Order cut samples of two or three and live with them on the wall for a day before choosing.

Yes. Cut samples are free to collect from our Ascot showroom, or we can post one to you for the cost of postage. Seeing the glaze in your own light is the surest way to judge how it will sit against your paint, stone and metalwork.

As a guide, add around 10% to your measured area for cuts and breakages, and nearer 15% for a herringbone, diagonal or brick-bond layout. It is also worth keeping a few spare tiles from the same batch in case a repair is ever needed.

Because that is what the colour is. It sits on the line between blue and grey, so whatever light is in the room decides which side comes forward. Cool north light and an overcast morning pull it towards grey; warm afternoon and evening light, or a warm bulb, bring the blue out. It is the most useful thing to know about this tile, and the reason a single glance at a sample is not enough. Tape a sample to the wall and look at it at the times you actually use the room — first thing, mid-afternoon, and after dark with the lights on. If you want to steer it one way, the grout does most of that work.

A 152 x 152mm tile covers 0.023m², so a square metre of wall takes about 43 of them. Boxes hold 22 and cover 0.511m² as supplied — just under two boxes to the square metre. Measure the tiled area, add around 10% for cuts, then round up to whole boxes, and order any half tiles, trims or mouldings at the same time so everything comes from one batch.

Eighteen — the full Artworks set. The 152mm field tile and its half tile, a 228 x 75mm large brick, bevelled metro tiles in 150 x 75mm and 75 x 75mm, a skirting tile, a plain cornice, an external corner, and ten mouldings: Victoria, Egg & Dart, Dentil, Hogarth, Albert, Rope, Astragal, Scroll, Sigma and the Omega dado. Original Style also make rectangles, round-edge tiles, internal corners and corner wrapping pieces to order in this colour — those carry minimum quantities and longer lead times, so call us on 01344 620211 if a scheme needs one.

It is one of the easiest colours in the range to build a scheme around, because it behaves as much like a soft neutral as a colour. Pewter, zinc, brushed nickel and unpolished chrome are natural partners — cool metals that share its quality of not quite committing. It also takes brass perfectly well if you want to warm it. Beyond metals: white and off-white paintwork, pale oak, painted joinery in a soft grey or green, limestone, and white sanitaryware. For an accent, a deep rose, a soft terracotta or a muted mustard all lift it without shouting.

It is a 152 x 30mm piece with a rounded, fully glazed face that wraps an outside corner, so instead of two cut tile edges meeting at an arris you get one continuous curve of glaze. A cut tile shows the pale unglazed body along the cut, and on a soft colour that pale line is more noticeable than you might expect, because there is little contrast elsewhere to distract from it. The rounded face also catches the light differently along its curve, which suits this colour. Four to a box covering 0.6 linear metres. If your scheme has an outside corner — a chimney breast, a boxed pipe, a window reveal — this is the piece that finishes it properly.