Thames 900x750 splashback featuring a sleek matte teal glass panel with subtle reflective highlights

Original Style

Thames 900x750 Splashback Wall Tile

Material: Glass
Finish: Gloss
Suitable for: Interior walls

Product variants

In stock Dispatched within 3–5 working days

£251.78 per m²

£169.95 per tile

Sold by the tile

Tiles

Wastage for cuts & breakages — added on top of the quantity above, rounded up to whole units

Total excl. delivery …

·Official Original Style stockist

900x750 Splashback· 6 designs

Thames Clear Glass 10 x 10cm Wall Tile Clear Glass 10 x 10cm
Thames Clear Glass 30 x 10cm Wall Tile Clear Glass 30 x 10cm
Clear Glass 398 x 198mm
Clear Glass 398 x 80mm
750x600 Splashback
900x750 Splashback

IM-0022078

Product details

Product story

Grand-Scale Simplicity: Thames 900 x 750mm Glass Splashback

Cover a whole cooking zone in one clean sweep with the Thames 900 x 750mm Clear Glass Splashback from Hyperion Tiles.

This large single toughened clear glass panel spans generously behind hobs and cookers with no joints and no grout. The transparent finish reflects light and reveals your wall colour beneath, giving a bright, uncluttered and thoroughly contemporary kitchen backdrop.

Made from heat-resistant toughened glass, it is non-porous, hard-wearing and wipes clean in seconds. A practical, elegant finish for kitchen and utility walls that coordinates seamlessly with the wider Thames clear-glass range.

Product specification

Product Name: Thames 900 x 750mm Clear Glass Splashback

Brand: Original Style

Range: Thames

Material: Toughened Glass

Finish: Gloss (clear)

Colour: Clear / Neutral

Edge: Polished straight

Panel Size: 900 x 750 x 6mm

Suitability: Interior walls & splashbacks — kitchens, bathrooms & utility; heat-resistant behind hobs

Frostproof: No — interior use only

Sealing: Not required — glass is non-porous

Cutting: Toughened — all cut-outs must be specified before manufacture; cannot be cut on site

Adhesive: Use a white, flexible glass-rated adhesive (grey adhesive shows through clear glass)

Sold By: The Panel

Delivery

In-stock orders are dispatched within 3–5 working days, with express options available. Special-order and made-to-order ranges carry their own lead time, shown on the product page and confirmed when you order. Pallet, slab, large-format and bathware orders travel on a specialist off-load service — we confirm the timescale and book a date that suits you before dispatch.

Delivery is calculated at checkout from your order and postcode (we do not offer showroom collection) and UK delivery is free on orders over £1,000 on most ranges. For pallet deliveries please tell us about access issues in advance — low trees or bridges, narrow roads or gateways, gravel drives, or no turning or unloading space — as a re-delivery charge may apply if we cannot complete delivery.

When your order arrives

Please check your delivery as soon as it arrives. Once goods are unloaded they become the responsibility of the receiver, so if anything isn’t right, contact us within three working days and we’ll put it right quickly.

Returns

To request a return, contact Hyperion within 14 days of delivery. For eligible online consumer cancellations, you have a further 14 days after telling us to send the goods back. Contact us for the correct return address; your statutory cancellation does not depend on our authorisation.

Additional supplier returns have their own eligibility rules, charges and exclusions. These do not override statutory cancellation rights or rights for faulty goods. See our refund policy and supplier return guidance before arranging a return.

Product Frequently Asked Questions

What is the advantage of a single-piece glass splashback over tiles?

There are no grout joints. That means nothing behind a hob for cooking grease and steam to collect in, and a completely seamless surface that wipes clean in one pass.

Visually it also reads as a single plane of colour rather than a grid, which suits a contemporary kitchen. It is the easiest splashback surface to keep clean that we sell.

Can a glass splashback go directly behind a gas hob?

Glass splashback panels are widely used behind gas and induction hobs, but you must follow the clearances stated by your hob manufacturer — these vary by appliance and are the governing requirement.

If your hob sits tight against the wall or has a high burner output, tell us the make and model along with your measurements and we will confirm whether the panel you are considering is appropriate.

Can these panels be cut down or drilled for sockets?

Not on site. Toughened glass cannot be cut, drilled or notched after it has been toughened — any attempt will shatter the panel.

All cut-outs for sockets, switches and extractors have to be made before toughening, so we need your final, checked measurements and cut-out positions up front. Measure after your worktop and units are fitted, not before.

How is a glass splashback fixed to the wall?

Onto a flat, clean, dry wall using a neutral-cure silicone or a proprietary glass adhesive, applied in vertical beads so any trapped moisture can escape. Support the panel while it cures.

The wall needs to be genuinely flat, as glass will not follow a bowed surface and will sit proud at one edge. Seal along the worktop junction with a colour-matched neutral-cure silicone rather than grout.

How do I measure up for a glass splashback panel?

This panel measures 900 x 750 x 6mm and is supplied as a single piece of toughened glass, so there is nothing to calculate by the square metre — you either need one panel or several butted together.

Measure the width of the run and the height from the worktop up to the underside of your extractor or wall units, and always measure after the units and worktop are installed rather than working from a plan. Note the exact position of any sockets, switches or extractor cut-outs.

Toughened glass cannot be cut, drilled or notched once it has been made, so every cut-out has to be specified before manufacture. Send us your measurements and we will check them and confirm whether a standard size fits or whether you need one made to order.

The Hyperion Family Promise

Our family-run Ascot team is here to help you choose with confidence, check the practical details and plan your project.

Ask us about available samples, quantities and delivery before you commit. Returns and delivery terms depend on the product and supplier.

Read delivery and returns information

Installation & Care Tips

Installation & care

Use a White Adhesive: Clear glass is translucent, so grey or standard adhesive will show through. Fix with a bright white, flexible glass-rated adhesive or the manufacturer's recommended fixing method.
Ideal for Wet Areas: Non-porous and wipe-clean — perfect behind hobs and cookers and across kitchen, utility and bathroom walls.
Specify Cut-outs Before Ordering: Toughened glass cannot be cut, drilled or notched after manufacture — all sockets, switches and cut-outs must be specified before your order is made. Take care with exposed edges.
Cleaning: Warm water, a soft cloth and standard glass cleaner keep it gleaming; avoid abrasive pads and harsh chemicals. No sealing required.

Your cookie choices