Hyperion Tiles Ascot BerkshireBEAUTY IN EVERY DETAIL

Product details

Product story

One Generous Plank of Quarry-Worn Limestone

Shellstone limestone with a brushed, lightly textured face, supplied as a 61 x 30.5cm plank for walls and floors, by Hyperion Tiles.

This is limestone laid down from shell and coral debris, and at close range you can read that history in the surface: pale beige and cream, freckled with tiny fossil fragments and the occasional darker seam. Being a limestone it is more open and more porous than a marble, so sealing is not optional — but it is also warmer in tone and softer in feel. The brushed finish is worked with wire heads that wear back the softer material and gently round the arris, producing a matt, faintly undulating face and the sort of quietly worn look that usually takes decades of use to earn.

Run these planks along the length of a hallway, with the long edge following the direction you walk, and the corridor reads longer and calmer; the format covers ground with roughly half the joints of a 30cm square. A half-bond layout suits the stone's variation, and a stack bond suits a wall where you want the horizontals to draw the eye sideways. The textured brushed surface holds grip when wet, which makes it a sound choice for a shower floor or wet room as well as a boot room, and it sits happily over underfloor heating.

Product specification

Product Name: Shellstone Brushed Limestone

Brand: Hyperion Tiles

Material: Shellstone Limestone — natural stone

Finish: Brushed

Colour: Beige

Available Sizes: 61 x 30.5 x 1cm

Suitability: Internal walls and floors — bathrooms, showers, wet rooms, hallways

Underfloor Heating: Suitable

Frostproof: No — internal use only

Sealing: Required — before grouting and again after

Sold By: The tile — 5.4 tiles per m²
Delivery

In-stock orders are dispatched within 3–5 working days, with express options available. Special-order and made-to-order ranges carry their own lead time, shown on the product page and confirmed when you order. Pallet, slab, large-format and bathware orders travel on a specialist off-load service — we confirm the timescale and book a date that suits you before dispatch.

Delivery is calculated at checkout from your order and postcode (we do not offer showroom collection) and UK delivery is free on orders over £1,000 on most ranges. For pallet deliveries please tell us about access issues in advance — low trees or bridges, narrow roads or gateways, gravel drives, or no turning or unloading space — as a re-delivery charge may apply if we cannot complete delivery.

When your order arrives

Please check your delivery as soon as it arrives. Once goods are unloaded they become the responsibility of the receiver, so if anything isn’t right, contact us within three working days and we’ll put it right quickly.

Returns

To request a return, contact Hyperion within 14 days of delivery. For eligible online consumer cancellations, you have a further 14 days after telling us to send the goods back. Contact us for the correct return address; your statutory cancellation does not depend on our authorisation.

Additional supplier returns have their own eligibility rules, charges and exclusions. These do not override statutory cancellation rights or rights for faulty goods. See our refund policy and supplier return guidance before arranging a return.

Product Frequently Asked Questions

Do these natural stone mosaics need sealing?

Yes. Marble, travertine, limestone and onyx are porous stones, so they should be sealed with a good impregnating stone sealer before grouting and again once the grout has cured. Sealing before grouting is the step most often skipped, and it is the one that stops grout haze staining the face of the stone. In a shower or wet room, expect to re-apply the sealer every couple of years.

Will the mosaic I receive look exactly like the photograph?

No, and that is the point of natural stone. Veining, tone and the density of markings shift from block to block, so your sheets will be their own thing rather than a copy of the photograph. Order the whole job in one go so it comes from a single batch, then open several boxes at once and shuffle the sheets as you lay, which spreads any variation evenly instead of leaving it in patches.

Can I order a sample before I commit?

Yes. A sample swatch is £2 and is posted to you, which is the sensible way to judge natural stone against your own light, paint and sanitaryware. You are also very welcome to see full sheets in our Ascot showroom, where you can lay them next to the rest of your scheme.

Can these be used on a bathroom floor or inside a shower?

Yes, provided the stone is properly sealed and the substrate is sound and tanked. Mosaics are particularly good on shower floors because the dense grout joints give grip and the small pieces follow a fall to the waste without needing cuts. Bear in mind that a polished finish is considerably more slippery underfoot when wet than a honed, tumbled or brushed one.

Are these mosaics suitable for underfloor heating?

Yes. Natural stone conducts heat well and is one of the better surfaces to lay over underfloor heating. Use a flexible adhesive and a flexible grout, leave the system off until the adhesive and grout have fully cured, then bring the temperature up gradually over several days rather than all at once.

What grout should I use with a stone mosaic?

A fine, unsanded grout is best for the narrow joints found in mosaic sheets — sanded grouts can scratch a polished or honed surface as you work them in. Seal the stone first, choose a grout tone close to the mid-tone of the stone unless you actively want the pattern outlined, and clean the faces as you go rather than letting haze set.

Can I use these outside?

We recommend these mosaics for internal use. Marble, limestone and travertine are frost-sensitive and will etch and weather in a British winter, and a mesh-backed sheet is not the ideal build-up for an exposed terrace. If you have an external or poolside scheme in mind, talk to us first and we will point you at something specified for it.

How should I clean and look after natural stone mosaics?

Use warm water and a pH-neutral stone cleaner. Keep anything acidic well away — limescale removers, vinegar, lemon and most bathroom sprays will etch a dull mark into marble, travertine and limestone within seconds. Avoid bleach and abrasive pads too, and wipe up splashes of wine, oil or toiletries promptly rather than letting them sit.

Do you deliver, and what does it cost?

We deliver throughout the UK, and delivery is free on orders over £1,000. Below that it is calculated at checkout. Stone is heavy, so larger orders travel palletised to a kerbside — please make sure someone is on site to check the boxes over before the driver leaves.

Can I see this mosaic in person?

Please do. Our family-run showroom is at 67 High Street, Ascot, and stone is one of those materials that really does need to be seen rather than scrolled past. Bring your paint colours and a photograph of the room and our team will help you work through it. Call 01344 620211 if you would like to check we have a particular mosaic out on display.

Didn’t find your answer?

Don't hesitate to contact us

The Hyperion Family Promise

Our family-run Ascot team is here to help you choose with confidence, check the practical details and plan your project.

Ask us about available samples, quantities and delivery before you commit. Returns and delivery terms depend on the product and supplier.

Read delivery and returns information
Installation & Care Tips

Installation & care

  • Sealing & Adhesive: Seal with an impregnating stone sealer before grouting and again once the grout has cured — a brushed limestone is open-textured and will hold grout pigment if it goes down bare. Use a white, flexible cement-based adhesive; grey adhesive can cool and dull the beige.
  • Layout: Straightedge the floor and level any dips before fixing, because a 61cm plank bridges hollows and rocks. Keep the offset to a third rather than a half so the natural bow of a long stone tile does not concentrate lippage at the mid-point, back-butter for full bedding, and dry-lay several square metres first so the darker and more heavily fossilled tiles are distributed evenly instead of arriving in a block.
  • Cleaning: Warm water and a pH-neutral stone cleaner only. Acidic limescale removers, vinegar and bleach will etch a permanent dull mark into the brushed limestone surface.
PLAN IT ONCE. KEEP IT TOGETHER.

My Project

Saved on this device while you keep browsing.

♡ Compare saved designs →
Shortlist designs first. Save quantities when you are ready.